产品名称：	1M*2.1mm*1/8，， TDX-01填充柱安装在岛津赛默飞安捷伦
产品型号：	1M*2.1mm*1/8，，
品牌：	1941
产品数量：
产品单价：	面议
日期:	2025-01-06

1M*2.1mm*1/8，， TDX-01填充柱安装在岛津赛默飞安捷伦的详细资料

TDX-01填充柱安装在岛津赛默飞安捷伦
TDX-01填充柱安装在岛津赛默飞安捷伦 详细信息：

TDX-01:

黑色多孔小球。系聚偏氯乙烯在惰性气体中，经180℃热烈解和1000℃灼烧而制成。有碳桥结构和非极性的惰性表面，热稳定性高，柱寿命长。堆积密度0.6g/ml.比表面积800m2/g。孔径1.5～2.0nm。粒度40～60目、60～80目、80～100目、100～120目、120～140目。

用作气相色谱的固定相（最高使用温度500℃），适用于分离低碳烃类、惰性气体、亦用于空气中氧、氮的分离和石油裂解气轻组分的分离，乙烯中微量杂质的分析，低碳烃中微量水、SO2、CO2等的分析。

名称：TDX-01填充柱

规格：1M*2.1mm*1/8

使用温度：330°C

应用：空气，一氧化碳，甲烷，二氧化碳的分离

适用于安捷伦480,5890,6890,7890,7820,8860,8890

岛津，赛默飞，瓦里安，布鲁克，PE

TDX-01填充柱安装在岛津赛默飞安捷伦 测试谱图：

TDX-01 filling column installed on Shimadzu Thermo Fisher Agilent
TDX-01 filling column installed on Shimadzu Thermo Fisher Agilent Details:
TDX-01:
Black porous ball. Polyvinylidene chloride is produced by thermal decomposition at 180 ℃ and calcination at 1000 ℃ in inert gas. It has a carbon bridge structure and non-polar inert surface, high thermal stability, and long column life. Bulk density 0.6g/ml. Specific surface area 800m2/g. The aperture is 1.5-2.0nm. Grain size of 40-60 mesh, 60-80 mesh, 80-100 mesh, 100-120 mesh, 120-140 mesh.
Used as a stationary phase for gas chromatography (with a maximum operating temperature of 500 ℃), suitable for separating low-carbon hydrocarbons, inert gases, as well as for separating oxygen and nitrogen in air and light components of petroleum cracking gas, analyzing trace impurities in ethylene, and analyzing trace amounts of water, SO2, CO2, etc. in low-carbon hydrocarbons.
Name: TDX-01 Filler Column
Specification: 1M * 2.1mm * 1/8
Operating temperature: 330 ° C
Application: Separation of air, carbon monoxide, methane, and carbon dioxide
Suitable for Agilent 480589068907890782088608890
TDX-01 filling column installed on Shimadzu Thermo Fisher Agilent test spectrum: