4m*1/8， Tenax硅烷化不锈钢填充柱应用岛津2014_填充柱_浩瀚色谱（山东）应用技术开发有限公司

产品展示

您当前的位置：首页 » 产品展示 » 填充柱 » 4m*1/8， Tenax硅烷化不锈钢填充柱应用岛津2014

产品名称：	4m*1/8， Tenax硅烷化不锈钢填充柱应用岛津2014
产品型号：	4m*1/8，
品牌：	1941
产品数量：
产品单价：	面议
日期:	2024-12-17

4m*1/8， Tenax硅烷化不锈钢填充柱应用岛津2014的详细资料

Tenax硅烷化不锈钢填充柱应用岛津2014
Tenax硅烷化不锈钢填充柱应用岛津2014 详细信息：

名称：硅烷化不锈钢填充柱

型号：TENAX,60-80目

规格：4m*1/8

zui高使用温度：350°C

编号：20241217006

适用于：安捷伦，岛津，赛默飞，瓦里安，布鲁克，PE，磐诺，北分瑞利，东西电子，科创，华爱，郎溪，川仪，福立，天瑞，天美，川仪，鲁南瑞虹等

聚2，6一二苯基对苯醚：Tenax-TA 应用领域:GC用填料和吸附剂,主要分析水、土壤、大气、呼吸气、香精香料和室内空气的高沸点化合物,如醇、酚、胺、醛、酮和卤代芳烃等。

Tenax TA 是一种吸附剂，它可以迅速达到大约35摄氏度的沉积温度，而无需其它冷却设备，并且，它不吸附水汽，所以在一般分析过程中，可以避免了由于其他物质引起的干扰。

Tenax-TA 一种2,6-二苯呋喃多孔聚合物树脂，广泛应用于气体、液体和固体中的挥发性物质或半挥发性物质的吸附性采集，亦可用于高湿度样品中的挥发物和用作填充材料，为美国EPA（环境保护局）和NIOSH许多标准分析方法指定使用。与短程热解吸系统连用，可检测到ppb和ppt水平的挥发物。

Tenax-TA 是基于2,6-二苯基呋喃(2,6-diphenylene oxide)的多孔型聚合物，用于提取气、液体和固体吹扫产生的挥发性和半挥发性物质，EPA与NIOSH已经将这种方式作为标准分析方法分析VOC组分，这种方法使用热解析或者吹扫捕集装置可以检测到ppb或者ppt级的挥发性有机物。由于其对于水的低亲和性，它更加适合用于从高水份中吹扫捕集易挥发性有机物甚至水中易挥发性有机物的分析。

Tenax-TA 应用领域：GC用填料和吸附剂，主要分析水、土壤、大气、呼吸气、香精香料和室内空气的高沸点化合物，如醇、酚、胺、醛、酮和卤代芳烃等。

Tenax硅烷化不锈钢填充柱应用岛津2014 测试谱图：

Tenax Silanized Stainless Steel Filled Column Application Shimadzu 2014
Tenax Silanized Stainless Steel Filled Column Application Shimadzu 2014 Details:
Name: Silanized Stainless Steel Filled Column
model: TENAX, 60-80 mesh
Specification: 4m * 1/8
Maximum operating temperature: 350 ° C
Number: 20241217006
Applicable to: Agilent, Shimadzu, Thermo Fisher, Varian, Brooke, PE， Panno, Beifen Ruili, Dongxi Electronics, Kechuang, Huaai, Langxi, Chuanyi, Fuli, Tianrui, Tianmei, Chuanyi, Lunan Ruihong, etc
Poly (2,6-diphenyl-phenyl ether): Tenax TA application field: filler and adsorbent for GC, mainly analyzing high boiling point compounds such as alcohol, phenol, amine, aldehyde, ketone and halogenated aromatic hydrocarbon in water, soil, atmosphere, breathing gas, essence and fragrance and indoor air.
Tenax TA is an adsorbent that can quickly reach a deposition temperature of approximately 35 degrees Celsius without the need for other cooling equipment. Additionally, it does not adsorb water vapor, thus avoiding interference caused by other substances in general analysis processes.
Tenax TA is a 2,6-diphenylfuran porous polymer resin widely used for the adsorption collection of volatile or semi volatile substances in gases, liquids, and solids. It can also be used for volatile compounds in high humidity samples and as a filling material, designated for use in many standard analytical methods by the US EPA (Environmental Protection Agency) and NIOSH. When used in conjunction with short-range thermal desorption systems, volatile compounds at ppb and ppt levels can be detected.
Tenax TA is a porous polymer based on 2,6-diphenylfuran (2,6-diphenylene oxide), used for extracting volatile and semi volatile substances generated by gas, liquid, and solid blowdown. EPA and NIOSH have adopted this method as a standard analytical method for analyzing VOC components, which can detect volatile organic compounds at ppb or ppt levels using thermal analysis or blowdown capture devices. Due to its low affinity for water, it is more suitable for blowing and capturing volatile organic compounds from high water content, and even for analyzing volatile organic compounds in water.
Tenax TA application field: filler and adsorbent for GC, mainly analyzing high boiling point compounds of water, soil, atmosphere, respiratory gas, essence and fragrance and indoor air, such as alcohol, phenol, amine, aldehyde, ketone and halogenated aromatic hydrocarbon.
Tenax Silanized Stainless Steel Filled Column Application Shimadzu 2014 Test Spectrum: