产品名称：	HJ 38-2017-HH-THC-30脱活毛细管空柱 固定污染源废气 总烃、甲烷和非甲烷总烃的测定 气相色谱法
产品型号：	HJ 38-2017-HH-THC-30脱活毛细管空柱
品牌：	1941
产品数量：
产品单价：	面议
日期:	2022-06-22

HJ 38-2017-HH-THC-30脱活毛细管空柱 固定污染源废气 总烃、甲烷和非甲烷总烃的测定 气相色谱法的详细资料

固定污染源废气 总烃、甲烷和非甲烷总烃的测定 气相色谱法
固定污染源废气 总烃、甲烷和非甲烷总烃的测定 气相色谱法 详细信息：

名称：总烃毛细管色谱柱

固定相：脱活的毛细管空柱

规格：30m*0.53mm

型号：HH-THC-30

材质：熔融石英

应用：HJ 38-2017 固定污染源废气 总烃、甲烷和非甲烷总烃的测定 气相色谱法

 为贯彻《中华人民共和国环境保护法》和《中华人民共和国大气污染防治法》，保护环境，保障人体健康，规范固定污染源废气中总烃、甲烷和非甲烷总烃的测定方法，制定本标准。本标准规定了测定固定污染源废气中总烃、甲烷和非甲烷总烃的气相色谱法。

HJ 38-2017 固定污染源废气 总烃、甲烷和非甲烷总烃的测定 气相色谱法（发布稿）
本标准于2018-4-1代替 HJ 38-1999
本标准规定了测定固定污染源废气中总烃、甲烷和非甲烷总烃的气相色谱法。
本标准适用于固定污染源有组织排放废气中的总烃、甲烷和非甲烷总烃的测定。
当进样体积为1.0 ml 时，本方法测定总烃、甲烷的检出限均为0.06 mg/m3（以甲烷计），测定下限均为0.24 mg/m3（以甲烷计）；非甲烷总烃的检出限为0.07 mg/m3（以碳计），测定下限为0.28 mg/m3（以碳计）。



Waste gas from stationary pollution sources - Determination of total hydrocarbons, methane and non-methane total hydrocarbons - Gas chromatography
Stationary pollution source waste gas Determination of total hydrocarbons, methane and non-methane total hydrocarbons Gas chromatography Details:

Name: Total Hydrocarbon Capillary Column

Stationary phase: deactivated capillary empty column

Specifications: 30m*0.53mm

Model: HH-THC-30

Material: Fused Silica

Application: HJ 38-2017 Waste gas from stationary pollution sources-Determination of total hydrocarbons, methane and non-methane total hydrocarbons-Gas chromatography


 This standard is formulated in order to implement the Environmental Protection Law of the People's Republic of China and the Law of the People's Republic of China on the Prevention and Control of Air Pollution, protect the environment, protect human health, and standardize the determination methods of total hydrocarbons, methane and non-methane total hydrocarbons in waste gas from stationary pollution sources. This standard specifies the gas chromatography method for the determination of total hydrocarbons, methane and non-methane total hydrocarbons in waste gas from stationary pollution sources.

HJ 38-2017 Waste gas from stationary pollution sources-Determination of total hydrocarbons, methane and non-methane total hydrocarbons-Gas chromatography (release)
This standard replaces HJ 38-1999 on 2018-4-1
This standard specifies the gas chromatography method for the determination of total hydrocarbons, methane and non-methane total hydrocarbons in waste gas from stationary pollution sources.
This standard is applicable to the determination of total hydrocarbons, methane and non-methane total hydrocarbons in the waste gas of fixed pollution sources.
When the injection volume is 1.0 ml, the detection limit of this method for the determination of total hydrocarbons and methane is 0.06 mg/m3 (calculated as methane), and the lower detection limit is 0.24 mg/m3 (calculated as methane); non-methane total hydrocarbons The detection limit is 0.07 mg/m3 (calculated by carbon), and the lower limit of determination is 0.28 mg/m3 (calculated by carbon).