产品中心
产品展示

  您当前的位置:首页 » 产品展示 » 填充柱 » GC--FID 氢火焰检测器的应用实例

产品名称: GC--FID 氢火焰检测器的应用实例
产品型号: GC--FID
品牌: 1941
产品数量:
产品单价: 面议
日期: 2022-02-28

GC--FID 氢火焰检测器的应用实例的详细资料

氢火焰检测器的应用实例
氢火焰检测器的应用实例 详细信息:

氢火焰离子化检测器(FID) 

高使用温度:400℃
小检出限:≤2.5*10 -12 g/s(n-C16)
线性范围:107(±10%)

噪声≤5×10-14A

漂移≤2×10-13 /30min

自动点火方式

 
包括:喷嘴,点火器,收集极,加热快,信号线,感温pt丝,室体等

氢火焰离子化检测器主要特点是对几乎所有挥发性的有机化合物均有响应, 对所有径类化合物 (碳数≥3) 的相对响应值几乎相等,对含杂原子的烃类有机物中的同系物(碳数≥3)的相对响应值也 几乎相等。这给化合物的定量带来很大的方便,而且具有灵敏度高(10-13~10-10g/s) ,基流 -小(10 ~10 A) ,线性范围宽(10 ~1 ) ,死体积小 ,响应快(1ms) ,可以和 毛细管柱直接联用,对气体流速、压力和很度变化不敏感等优点,所以成为应用广泛的气 相色谱检测器。



氢火焰检测器的应用实例  图片:




Application Examples of Hydrogen Flame Detectors
Application Examples of Hydrogen Flame Detectors Details:

Hydrogen flame ionization detector (FID)

Maximum operating temperature: 400℃
Minimum detection limit: ≤2.5*10 -12 g/s(n-C16)
Linear range: 107 (±10%)

Noise≤5×10-14A

Drift≤2×10-13 /30min

automatic ignition

 
Including: nozzle, igniter, collector, fast heating, signal line, temperature sensing wire, chamber body, etc.

The main feature of the hydrogen flame ionization detector is that it has a response to almost all volatile organic compounds, and the relative response values of all diametric compounds (carbon number ≥ 3) are almost equal. The relative response values of compounds (carbon number ≥ 3) are also almost the same. This brings great convenience to the quantification of compounds, and has high sensitivity (10-13~10-10g/s), small base flow (10~10A), wide linear range (10~1), dead volume Small size, fast response (1ms), can be used directly with capillary column, insensitive to gas flow rate, pressure and extreme changes, so it has become a widely used gas chromatographic detector.



Application example of hydrogen flame detector Picture: