产品名称：	TDX-01填充柱测定 耐硫一氧化碳变换催化剂
产品型号：	TDX-01填充柱测定
品牌：	1941
产品数量：
产品单价：	面议
日期:	2021-05-22

TDX-01填充柱测定 耐硫一氧化碳变换催化剂的详细资料

耐硫一氧化碳变换催化剂
耐硫一氧化碳变换催化剂 详细信息：

名称：填充柱

规格：2m*1/8

型号：TDX-01

应用：HG T 2780-2016 一氧化碳耐硫变换催化剂及其低压活性试验方法(2016)

耐硫一氧化碳变换催化剂及其制备方法，涉及一种一氧化碳变换催化剂。提供一种既适合在高压高汽气比，又能在低压低汽气比的宽操作条件下应用的耐硫一氧化碳变换催化剂及其制备方法。活性成分由以MoO表示的Mo的化合物、以CoO表示的Co的化合物和以KO表示的K的化合物组成，载体为镁铝尖晶石MgAl。按轻质MgO与氧化铝摩尔比为1∶1称取轻质MgO和多孔性含水无定形氧化铝置于混捏机中，加入硝酸的水溶液混合和捏压，形成可塑体，挤条成型后干燥，烘干，焙烧得多孔性MgAl载体。将钾盐、钴盐、钼酸铵和络合稳定剂用水溶解，用氨水调节溶液pH，用所配制的混合溶液浸渍计量的MgAl载体，干燥。


浩瀚色谱（山东）应用技术开发有限公司采用TDX-01填充柱测定耐硫一氧化碳变换催化剂中原料气，柱效高，分离好，结果满意。

耐硫一氧化碳变换催化剂 测试谱图：






Sulfur-tolerant carbon monoxide shift catalyst
Sulfur-tolerant carbon monoxide shift catalyst Details:

Name: Packed column

Specification: 2m*1/8

Model: TDX-01

Application: HG T 2780-2016 carbon monoxide sulfur tolerant shift catalyst and its low pressure activity test method (2016)





A sulfur-tolerant carbon monoxide shift catalyst and a preparation method thereof relate to a carbon monoxide shift catalyst. Provided is a sulfur-tolerant carbon monoxide shift catalyst suitable for application under wide operating conditions of high pressure and high steam-to-gas ratio as well as low pressure and low steam-to-gas ratio and a preparation method thereof. The active ingredient is composed of a Mo compound represented by MoO, a Co compound represented by CoO, and a K compound represented by KO, and the carrier is magnesium aluminum spinel MgAl. Weigh light MgO and porous hydrated amorphous alumina according to the molar ratio of light MgO to alumina of 1:1, place them in a kneader, add an aqueous solution of nitric acid, mix and knead to form a plastic body, and dry after extrusion. , Drying and calcining to obtain porous MgAl carrier. Dissolve potassium salt, cobalt salt, ammonium molybdate and complex stabilizer in water, adjust the pH of the solution with ammonia water, impregnate the metered MgAl carrier with the prepared mixed solution, and dry.


Haohan Chromatography (Shandong) Applied Technology Development Co., Ltd. uses TDX-01 packed column to determine the feed gas in the sulfur-tolerant carbon monoxide shift catalyst. The column efficiency is high, the separation is good, and the results are satisfactory.

Test spectrum of sulfur-tolerant carbon monoxide shift catalyst: