产品中心
产品展示

  您当前的位置:首页 » 产品展示 » 专用填充柱 » HH-Silica gel 硅胶柱测焊接混合气体二氧化碳/氩

产品名称: HH-Silica gel 硅胶柱测焊接混合气体二氧化碳/氩
产品型号: HH-Silica gel
品牌: 1941
产品数量:
产品单价: 面议
日期: 2023-10-16

HH-Silica gel 硅胶柱测焊接混合气体二氧化碳/氩的详细资料

硅胶柱测焊接混合气体二氧化碳/氩
硅胶柱测焊接混合气体二氧化碳/氩 详细信息:

对某金属结构厂车间CO2气体保护焊工作环境安装了离子荷电局部净化装置后的作业环境进行了粉尘、毒物等测定,现报告如下. 1 内容与方法 CO2气体保护焊焊接时,用80%氩气、20%CO2混合气体,在规定电压下使焊丝熔化进行焊接.主要危害因素为粉尘、毒物(锰、铁等)、电弧等. 粉尘测定采用滤膜计重法;游离二氧化硅含量采用焦磷酸法;锰及其化合物测定用高碘酸钾比色法;一氧化碳测定用一氧化碳测定仪;氮氧化物采用盐酸萘乙二胺比色法.
应用:HGT4984-2016焊接用混合气体二氧化碳-氧氩,HGT3728-2004焊接用混合气体氩-二氧化碳


填充柱1:

固定相:硅胶

粒度:0.18mm-0。25mm

规格:2m*3mm

型号:HH-Silica gel

应用:二氧化碳的测定


填充柱2:


固定相:分子筛

粒度:0.18mm-0。25mm

规格:2m*3mm

型号:MS5a/MS13X

应用:氧含量的测定

硅胶柱测焊接混合气体二氧化碳/氩 测试谱图:



Silica gel column welding mixed gas carbon dioxide / argon
Silica gel column welding mixed gas carbon dioxide / argon Details:

The dust and toxic substances were measured in the working environment after the ion-charged partial purification device was installed in the CO2 gas shielded welding working environment of a metal structure factory. The report is as follows. 1 Contents and methods 80% of CO2 gas shielded welding Argon gas, 20% CO2 mixed gas, the welding wire is melted and welded under the specified voltage. The main hazard factors are dust, poison (manganese, iron, etc.), arc, etc. The dust is measured by the filter weight method; the free silica content The pyrophosphoric acid method is used; the potassium periodate colorimetric method is used for the determination of manganese and its compounds; the carbon monoxide meter is used for the determination of carbon monoxide; the naphthylamine diamine colorimetric method is used for the nitrogen oxides.
Application: HGT4984-2016 welding mixed gas carbon dioxide-oxygen argon, HGT3728-2004 welding mixed gas argon-carbon dioxide


Packed column 1:

Stationary phase: silica gel

Particle size: 0.18mm-0. 25mm

Specification: 2m*3mm

Model: HH-Silica gel

Application: Determination of carbon dioxide



Packed column 2:



Stationary phase: molecular sieve

Particle size: 0.18mm-0. 25mm

Specification: 2m*3mm

Model: MS5a/MS13X

Application: Determination of oxygen content

Silicone column test welding mixed gas carbon dioxide / argon test spectrum: